Contents
Description and Photos
Exploded View
Prices and Availability
Evaluation Package
How to Order

Description
Next Topic | Previous Topic | TOC

Connector Insert with Straight-Through Pins Guards your Equipment - Protect board-mounted D-subminiature connectors that are subject to frequent insertion and removal of cables from mechanical wear-out using the Connector Protector™. The size of a mini gender-changer, the Connector Protector firmly attaches to Dsub connectors using jackscrews. When cables are connected or disconnected, the inexpensive Connector Protector takes the mechanical wear, and may be quickly and easily replaced when continuity becomes intermittent or damage is sustained. Available for all standard and high-density D-sub sizes. Female Dsub connectors are especially prone to rapid wear-out and, in some cases, become intermittent after only 50 insertion cycles. The Connector Protector guards laptop PCs or other portable equipment from the high cost of replacing worn-out board-mounted connectors, and also finds applications in high-reliability, low down-time applications. The jackscrews may be easily reversed to allow mounting to either female or male connectors.

Connector Insert with Ferrite or Capacitive Elements Blocks EMI - Retrofit board-mounted Dsub connectors with a Connector Protector containing an integral ferrite or capacitive element to suppress environmental EMI. Identical in form and size to the standard Connector Protector, the Connector Protector-EMI (ferrite) or Connector Protector-EMC (capacitive) include internal components that attenuates high-frequency interference by as much as 30dB. As an additional benefit, the Connector Protector isolates soldered-in connectors from mechanical wear-out by taking the abuse of repeated cable insertions and removals.

 Photos


Connector Protector ™
(click for larger image)


Available in DB9, DB15,
DB25 DB37, DB50,
DB15HD, DB26HD,
DB44HD, DB62HD,
and DB78HD

Exploded View
Next Topic | Previous Topic | TOC


Frequency Plot for
Ferrite Core Device (24K bytes)

The ferrite element serves as a notch filter with a resonant frequency of about 45 MHz. At this frequency, 30dB of attenuation is provided. Frequency response plots for the ferrite element device are available by clicking below.

A disassembled view of the Connector Protector-EMI (ferrite) appears on the left, and the Connector Protector -EMC (capacitive) on the right. For the -EMC device, the chip capacitors mounted on this tiny PCB connect each pin to ground (the shield). The stock capacitance value is 1000 pF, however, other values could be provided on special order. The frequency response for a capacitive device will simply be that of a low pass filter whose cutoff point is determined by the line impedance.

Prices and Availability
Next Topic | Previous Topic | TOC


Connector Protector (for pin protection, no internal components)

Quantity.................1-24 |25-99 | 100+

DB9 ....Item 901........$4.45 | 4.01 | 3.78
DB25....Item 902........ 5.65 | 5.09 | 4.80
DB15 ...Item 903........ 5.15 | 4.64 | 4.38
DB15HD .Item 904........ 6.15 | 5.54 | 5.23
DB37....Item 905........ 7.85 | 7.07 | 6.67
DB50....Item 906........ 8.95 | 8.06 | 7.61
DB26HD..Item 907........ 6.45 | 5.81 | 5.48
DB44HD..Item 908........ 7.93 | 7.14 | 6.74
DB62HD..Item 909........10.91 | 9.82 | 9.27
DB78HD..Item 910........11.50 |10.35 | 9.78



Connector Protector Flyer
with Photo and Prices
(108K bytes)


Connector Protector/EMI (with internal ferrite element)

DB9/EMI ..Item 901E.....$4.85 | 4.37 | 3.93
DB25/EMI..Item 902E..... 6.65 | 5.99 | 5.39
DB15/EMI..Item 903E..... 5.75 | 5.18 | 4.66
DB37/EMI..Item 905E..... 7.35 | 6.62 | 5.95


Connector Protector/EMC (with internal capacitor)

DB9/EMC ..Item 901C..... 7.41 | 6.67 | 6.30
DB15/EMC..Item 902C..... 9.13 | 8.22 | 7.76
DB25/EMC..Item 903C..... 7.19 | 6.47 | 6.11
DB37/EMC..Item 905C.....10.87 | 9.78 | 9.24

An internal capacitor connects each pin to the shell (ground shield) to suppress static discharge and other high-frequency interference. This serves as a low-pass filter. The effect on the signal depends on drive impedance. Stock capacitance value is 1000pf +/-20%. Capacitance choices available on special order are 180pf, 470pf, 820pf, 2200pf, 5600pf +/-20%.



Connector Protector/EMI Flyer
with Photo and Prices
(140K bytes)

Evaluation Package
Next Topic | Previous Topic | TOC

Order an evaluation package for $20.00 consisting of any four sizes of your choice. Mix and match Connector Protector, Connector Protector/EMI, and Connector Protector/EMC. Choose four different sizes or four of the same size. Delivered to any address in the USA. Priority Mail postage included in price. Will ship freight-collect by other means if desired. Pay by Mastercard/VISA /AMEX only. One evaluation package per customer please.

How to Order
Previous Topic | TOC

Connector Protector™ and Connector Protector/EMI ™ products are normally stocked.
Connector Protector/EMC ™ is stocked in 1000pf value, other values are built to order; 3-4 weeks delivery.

Orders by Purchase Order: provide three trade and a bank reference to set up Net 30 terms, or we will ship C.O.D. at your preference. Minimum order $50.00. Mail or Fax your order; we will ship within two days of receipt of order.

Orders by Credit Card: We will take VISA/MasterCard/American Express if you prefer. Minimum order $20.00. Call, write, or fax your order. We will ship within two days of receipt of order.

CAMI Research Inc.
530 Main Street, Suite 2
Acton, MA 01720

Toll Free: (800) 776-0414
Tel: (978) 266-2655
Fax: (978) 266-2658
e-mail: sales@camiresearch.com

If you have technical or other questions, please contact Christopher E. Strangio at the above numbers.

* "Connector Protector", "Connector Protector/EMI", and "Connector Protector/EMC" are trademarks of CAMI Research Inc. Copyright © 1997-2007, CAMI Research Inc.

Prices and availability are subject to change without notice.

Home | Contact | Products | Catalog | Videoclips | Prices | Support