152 Test Points, 76-Conductor Cable Maximum,
Expandable to 1024 Test Points

The photo below shows catalog Item 821, the CableEye M3 system with the CB15 board set attached (Model M2 looks exactly the same but does not measure resistance). The screen image on the right illustrates how CableEye Model M3 shows diodes and resistors in wiring schematics Model M3 is available with either a serial or USB interface (serial version shown below). Remove the interchangeable CB boards by pressing apart the latches near the front of the board. Choose from over 30 different CB boards to accommodate over 150 standard connector types. Use the CB8 board for prototyping and circular connectors, or the CB28 for bare wires. The M3 system requires only a 9x12" bench footprint and enough test points to handle cables of up to 76 conductors. For larger cables or wire harnesses, attach one or more 128-point expansion modules to attain the necessary capacity. If your cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

Actual Screen Image